ADELINO Automatic Self-Priming Peripheral Pump PW-Z
Performance Range:
- Head up to 50 m
- Flow rate up to 3.4 m³/h
Application Fields:
- Suitable for use with clean water that does not contain abrasive particles or other similar water of liquid.
- Widely used domestic water, automatic boosting, water tower supply, well water lifting, solar hot water boosting.
Applications Limits:
- Suction lift up to 8 m
- Max. working pressure 5 bar
- Liquid temperature up to +90°C
- Ambient temperature up to +40°C
- Voltage fluctuations should not exceed 10% of rate value
Features:
- Compact design, easy installation
- Pressure and flow switch control automatically
- Pump body insert of stainless sheet 304
- Shaft extension is stainless steel 304
- The impeller of copper alloy
- High quality mechanical seal
- Intelligent control: Pump can supply stabilized water flow by automatically running. Through the water flow and water pressure data collected by flow switch and pressure switch, electronic unit control the pump running/stop, solve the frequently starting problems under low water flow, and completely inhibit frequently starting if water flows lower than 0.3m³/h.
- Time delay start: 3-seconds delay on startup to prevent electric transient surge
- Dry-Run protection: Pump shut down if no water flows past pump inlet after running 6 minutes, when there is water flow past pump inlet, pump restart.
- Scale prevention: Pump will automatically run 10 seconds for scale prevention once per 3 days among outage period.
- Electronic switch: Long service life, and eliminate the “da da” noise caused by mechanical pressure switch